Dealing room video solutionEND DESIGN AV
End Design Limited
Unit 37
Bookham Industrial Park
Church Road Bookham
KT23 3EU UK

 

t.01372 458080
f.01372 450592
VIDEO DISTRIBUTION SPECIALISTS SINCE 1984
 
 
Home   | Up  |   Info   | Search  | Shopping Cart  |  Checkout   | Contact Us  | Login   

Left tabDVI ExtendersRight tab

For impartial help and advice backed by 20 years experience call 01372 458080

End Design AV > DVI Solutions > DVI Extenders

Ref: CX-DVI180DVI Extender up to 180m over a single Cat5/6 Cable
DVI Extender up to 180m over a single Cat5/6 Cable

The CatX DVI 180 transmitter and receiver pair sends DVI video over a single cat5 or cat6 cable up to 180m, depending on the display resolution. Designed for ease of installation, this unit will broadcast HD digital video, audio and RS232 over cat6 UTP cable at 1080p up to 180m.

This product connects directly to the DVI source but there is no local DVI output on this device.

A state of the art chip set ensures compatibility and reliability

  • DVI 1.0 compliant
  • HDCP 1.1 compliant
  • Analogue audio in both directions
  • Supports transparent EDID transfer
  • Provides USB for keyboard + mouse (USB HID devices only)
  • Simple duplex RS232 control up to 115 kbaud (TxD and RxD Only)
  • Supports a range of IR controllers
  • Low latency (less than 0.5us)
  • Only one Cat6 cable required
 




Ref: DVI-FibreDVI Extender up to 550 metres over a multimode fibre cable
DVI Extender up to 550 metres over a multimode fibre cable

The CatX DVI Fibre transmitter and receiver pair sends DVI video over a single multimode fibre optic cable up to 550m, depending on the display resolution. Designed for ease of installation, this unit will broadcast HD digital video, audio and RS232 over a single multimode fibre optic cable up to 550m.

This product connects direct to the DVI source and there is no local DVI output on this device.

These units use a state of the art chip set thus ensuring compatibility and reliability.

  • DVI 1.0 compliant
  • HDCP 1.1 compliant
  • Analogue audio in both directions
  • Supports transparent EDID transfer
  • Provides USB for keyboard + mouse (USB HID devices only)
  • Simple duplex RS232 control up to 115 kbaud (TxD and RxD Only)
  • Supports a range of IR controllers
  • Low latency (less than 0.5us)
  • Only one multimode fibre cable required
 




Ref: ALIF-AIM-UKAdderLink Infinity Manager Device and embedded software
AdderLink Infinity Manager Device and embedded software

Designed and made in Great Britain

AdderLink INFINITY Manager (A.I.M.) The AdderLink INFINITY management suite is a set of tools to allow you to remotely configure all your connected Rx and Tx units.

The A.I.M. suite is located in a small hardware device. This essentially acts asa web server on your network. You can view the A.I.M. interface directly through a standard web interface. When you update a receiver or transmitter (e.g. asking the receiver to change channel remotely), A.I.M sendsa configuration file/ticket to the unit specified which upon receipt carries out the new configuration (in this case changing to a different channel address). Further to simple tasks like changing channel, the A.I.M. suite can also be used to apply new firmware to Rx and Tx units. This could be a task performed across a very large number of Rx/Tx devices at once.

You can define new content channels, restrict and enable access privileges, push control, disable specific USB device classes, log user activity and so on.

A.I.M. is delivered as a single box you plug into your network, and can access from any other device on the network. The A.I.M. hardware runs silently and is easily rackmounted. Once plugged into the network, your administrators/managers can begin configuring devices, users and channels to fit your unique needs.

The A.I.M. Interface features a useful dashboard which gives you a current overview of the system. The A.I.M. interface is continually refreshed so you can always be sure that what information is given is correct.

AdderLink INFINITY BrochureProduct User Guide

 




Ref: ALIF1000PAdderLink INFINITY Network DVI Extender pair (Transmitter and Receiver)
AdderLink INFINITY Network DVI Extender pair (Transmitter and Receiver)

Designed and made in Great Britain

AdderLink INFINITY allows you to build a flexible infrastructure, the likes of which have not been possible before. Locate computers anywhere you like, share connections to computers, watch the interactions others have with computers, share control, collaborate, switch computers and so on. The AdderLink INFINITY is also the first device of its kind to allow multicasting across your network.

Optimized for both HID and Mass Storage devices, the AdderLink INFINITY uses USB 2.0 technology to deliver reliable and flexible device support.

AdderLink INFINITY BrochureProduct User Guide

 




Ref: ALIF1000TAdderLink INFINITY Network DVI Transmitter
AdderLink INFINITY Network DVI Transmitter

Designed and made in Great Britain

TRANSMITTER UNIT ONLY

used in conjunction with AdderLink Infinity receiver units

AdderLink INFINITY BrochureProduct User Guide

 




Ref: ALIF1000RAdderLink INFINITY Network DVI Receiver
AdderLink INFINITY Network DVI Receiver

Designed and made in Great Britain

RECEVER UNIT ONLY

used in conjunction with AdderLink Infinity transmitter

AdderLink INFINITY BrochureProduct User Guide

 




Ref: X-DVIPROAdderLink Single DVI Extender & USB - UK mains lead
AdderLink Single DVI Extender & USB - UK mains lead

The AdderLink X-DVI PRO allows users to distribute control of any computer which uses DVI video and USB. The X-DVIPRO can deliver perfect 1080p digital video at distances over 50 meters.

Full single link DVI extender - The ADDERLink X-DVI PRO extender delivers full single link DVI digital video resolutions up to 165 MPixels per second. ( the maximum data rate available on single link DVI connections), and is achieved without data compression) . Resolutions supported by single link DVI range from 640 x 480 @ 60 Hz (25 MPixels/s) through to 3840 x 2400 @ 17Hz (164 MPixels/s).

Transparent USB - The ADDERLink X-DVI PRO delivers bidirectional USB (low speed / full speed) data allowing you to extend any USB device over 50 meters on the same CATx cable.

Single CATx - ADDERLink X-DVI PRO requires just one CATx (CAT7a recommended) cable. Other solutions available require two cables to carry DVI and DDC EDID. The X-DVIPRO delivers this alongside USB data over a single CATx cable. Dependent upon cable type, quality and connections distances may vary. See technical specification for detailed rules.

DVI-D digital video - The ADDERLink X-DVI PRO is specifically designed to carry digital video over 50 meters. By maintaining the video in a purely digital domain, no loss of quality through D/A or A/D conversion will be experienced, ensuring the display output (LCD panel for example) is exactly the same as the signal produced by the display adapter (video card).

Extended profile DDC EDID - The ADDERLink X-DVI PRO carries DDC EDID data from your display to ensure optimal video performance. (impotrant when extending video to high performance display devices) This is essential for professional graphics users such as post production, broadcast, architecture, graphic design, medical imaging, CAD or any other applications where display performance is critical.

Data sheet

 




Ref: X-DVIPRO-MS2AdderLink Dual Head DVI, USB & Audio Extender
AdderLink Dual Head DVI, USB & Audio Extender

Full Single Link DVI Extender - The ADDERLink X-DVI PRO-MS extender delivers two single link DVI digital video resolutions up to 165 MPixels per second. 165MPixels per second is the maximum data rate available on single link DVI and is achieved without compression. Resolutions supported by single link DVI range from 640 x 480 @ 60 Hz (25 MPixels/s) through to 3840 x 2400 @ 17Hz (164 MPixels/s).

HDMI 1.3a Operation - By using HDMI to DVI converter cables, the ADDERLink X-DVI PRO-MS can support HDMI Video and Audio up to the 165MHz clock rate (1920 x1080 @60Hz 24bit color) 8 channels of HDMI audio is supported with sample sizes of 16, 20 or 24 bit at 32KHz, 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, or 192kHz (simultaneously with the jack audio). It does not support HDCP or CEC control.

CD Quality Audio Extention - Two audio extention ports (stereo channel 16 bit audio ports sampled at 44.1KHz -CD quality) are available to transfer audio from local to remote for a line out / headphone use case.

USB 2.0 Transparent Connection - Delivers bidirectional USB 2.0 (low speed/full speed) data allowing you to extend any USB device up to 50 meters over the same CATx cables. This makes the X-DVI PRO perfect for distributed workstations where you want to reduce environmental concerns such as heat and noise. A typical example of this would be post production suites. By centralising your workstations, you can also extend operational life-span by ensuring optimal temperature control, and minimal physical disturbance.

CATx Distribution - ADDERLink X-DVI PRO-MS requires one CATx (CAT7a recommended) cable per video head. The X-DVI PRO-MS delivers video alongside USB data and audio over a single CATx cable. Dependent upon cable type, quality and connections distances may vary. See Technical specification for detailed rules.

Extended profile DDC EDID - The ADDERLink X-DVI PRO carries DDC EDID data from your display to ensure optimal video performance. (impotrant when extending video to high performance display devices) This is essential for professional graphics users such as post production, broadcast, architecture, graphic design, medical imaging, CAD or any other applications where display performance is critical.

Data sheet

 




Ref: DVS-DRDatabay Short Range self-powered DVI Receiver
Databay Short Range self-powered DVI Receiver

Utilising cost effective and readily available Cat5e/6 cable and in conjunction with the DVI-E101T transmitter Unit, these units allow extended distances to be quickly and easily covered between AV source and display devices. This 1 Port self-powered receiver is designed for short range transmission up to 10 metres.1280 x 1024 @ 10m or 1024 x 768 @ 20m

 




Ref: DVI-E101TDatabay 1 Port self-powered DVI to RJ45 Compact Transmitter
Databay 1 Port self-powered DVI to RJ45 Compact Transmitter

Used in conjunction with the DVS-DR or DVI-E101R Receiver Units.The performance depends on the receiver unit selected.

User Manual 



Ref: VE600Aten VE600 DVI Video & Audio extender
Aten VE600 DVI Video & Audio extender
  • Requires only one Cat 5e or Cat 6 cable to extend DVI and audio signals up to 30 m
  • Fully compliant with DVI 1.0 specification
  • Audio enabled for stereo speaker connection
  • Supports VESA standard display resolutions and HDTV resolutions
  • Supports DDWG standard for DVI compliant monitors
  • Picture compensation improves video quality over long distances
  • Superior video resolution - up to 1280 x 1024 @ 60Hz (PC) and 1080i(HDTV)
  • DDC pass through
  • Compliant with the console and computer ports of all ATEN DVI video switches, splitters, extenders and converters
  • Quick start quide

 




Ref: VE800Aten HDMI extender
Aten HDMI extender  The VE800 HDMI Extender extends your HDMI display up to 60 m away from your HDMI source using two Cat 5e or Cat 6 cables. It is equipped with HDMI (high definition multimedia interface) connectors and is capable of supporting DVI (digital visual interface) equipment when used with a HDMI-to-DVI adapter, providing greater flexibility and installation options when integrating several home theatre components.

Datasheet

 





End Design AV > DVI Solutions > DVI Extenders

End Design Limited Established 1985 Registered in England & Wales Company No. 1920982 Registered Office Unit 37 Bookham Industrial Park Church Road Bookham KT23 3EU.
VAT registration No. GB 384 3922 29 Telephone 01372 458080 Fax 01372 450592